ISO 8678

[metric/bolts] Carriage bolts, short neck; ISO 8678; DIN 603. More...

Collaboration diagram for ISO 8678:

Files
file	iso_8678.scad
	[metric/bolts] Carriage bolts, short neck; ISO 8678; DIN 603.

Variables
	dtc_fastener_metric_bolts_iso_8678
	dtr_fastener_metric_bolts_iso_8678

Detailed Description

[metric/bolts] Carriage bolts, short neck; ISO 8678; DIN 603.

Requires:
include <omdl-base.scad>;
include <database/component/fastener/iso_8678.scad>;

Carriage bolts, short neck table

idx	nominal size (ns)	thread pitch (tp)	square width across flats (o_max)	square width across flats (o_min)	square width across corners (c_min)	square depth (p_max)	square depth (p_min)	head diameter (a_max)	bearing surface diameter under head (b_min)	head height (h_max)	head height (h_min)	thread length (l1_ref)	thread length (l2_ref)
0	M6	1	6.48	5.88	7.64	3	2.4	14.2	12.2	3.6	3	18	undef
1	M8	1.25	8.58	7.85	10.2	3	2.4	18	15.8	4.8	4	22	28
2	M10	1.5	10.58	9.85	12.8	4	3.2	22.3	19.6	5.8	5	26	32
3	M12	1.75	12.7	11.82	15.37	4	3.2	26.6	23.8	6.8	6	30	36
4	M16	2	16.7	15.82	20.57	5	4.2	35	31.9	8.9	8	38	44
5	M20	2.5	20.84	19.79	25.73	5	4.2	43	39.9	10.9	10	46	52

l1_ref for [L<=125]; l2_ref for[L>125 & L<=200]

Note

The measurements in the table above are shown with: length_unit_base="mm". These measurements will convert when the base units are changed. See Length Units for more information on setting the base units.

References:
ISO 8678
DIN 603
ISO 8678:1988

Variable Documentation

dtc_fastener_metric_bolts_iso_8678

dtc_fastener_metric_bolts_iso_8678

<map> ISO 8678 fastener data table columns map.

Definition at line 273 of file iso_8678.scad.

dtr_fastener_metric_bolts_iso_8678

dtr_fastener_metric_bolts_iso_8678

<table> ISO 8678 fastener data table rows.

Definition at line 292 of file iso_8678.scad.