[metric/screws] Button head socket cap screws; ISO 7380; DIN EN ISO 7380-1. More...

Collaboration diagram for ISO 7380:

Files
file	iso_7380.scad
	[metric/screws] Button head socket cap screws; ISO 7380; DIN EN ISO 7380-1.

Variables
	dtc_fastener_metric_screws_iso_7380

	dtr_fastener_metric_screws_iso_7380

Detailed Description

[metric/screws] Button head socket cap screws; ISO 7380; DIN EN ISO 7380-1.

Requires:
include <omdl-base.scad>;
include <database/component/fastener/iso_7380.scad>;

Button head socket cap screws table

idx	nominal size (ns)	thread pitch (tp)	head diameter (a_max)	head diameter (a_min)	head height (h_max)	head height (h_min)	socket size across the corners (c_min)	socket size across the flats (j_max)	socket size across the flats (j_min)	key engagement (t_min)	wall thickness (w_min)	unthreaded section under the head (s_max)	unthreaded section under the head (s_min)	fillet transition diameter (f_max)
0	M3	0.5	5.7	5.4	1.65	1.4	2.3	2.045	2.02	1.04	0.2	1	0.5	3.6
1	M4	0.7	7.6	7.24	2.2	1.95	2.87	2.56	2.52	1.3	0.3	1.4	0.7	4.7
2	M5	0.8	9.5	9.14	2.75	2.5	3.44	3.071	3.02	1.56	0.38	1.6	0.8	5.7
3	M6	1	10.5	10.07	3.3	3	4.58	4.084	4.02	2.08	0.74	2	1	6.8
4	M8	1.25	14	13.57	4.4	4.1	5.72	5.084	5.02	2.6	1.05	2.5	1.25	9.2
5	M10	1.5	17.5	17.07	5.5	5.2	6.86	6.095	6.02	3.12	1.45	3	1.5	11.2
6	M12	1.75	21	20.48	6.6	6.24	9.15	8.115	8.025	4.16	1.63	3.5	1.75	14.2
7	M16	2	28	27.48	8.8	8.44	11.43	10.115	10.025	5.2	2.25	4	2	18.2

Note: The measurements in the table above are shown with: length_unit_base="mm". These measurements will convert when the base units are changed. See Length Units for more information on setting the base units.

Variable Documentation

dtc_fastener_metric_screws_iso_7380

<map> ISO 7380 fastener data table columns map.

Definition at line 273 of file iso_7380.scad.

dtr_fastener_metric_screws_iso_7380

<table> ISO 7380 fastener data table rows.

Definition at line 293 of file iso_7380.scad.