[metric/washers] Standard flat washer, small outer diameter; ISO 7092; DIN 433. More...

Collaboration diagram for ISO 7092:

Files
file	iso_7092.scad
	[metric/washers] Standard flat washer, small outer diameter; ISO 7092; DIN 433.

Variables
	dtc_fastener_metric_washers_iso_7092

	dtr_fastener_metric_washers_iso_7092

Detailed Description

[metric/washers] Standard flat washer, small outer diameter; ISO 7092; DIN 433.

Requires:
include <omdl-base.scad>;
include <database/component/fastener/iso_7092.scad>;

parameters

Standard flat washer, small outer diameter table

idx	nominal size (ns)	internal diameter (id_max)	internal diameter (id_min)	outside diameter (od_max)	outside diameter (od_min)	thickness (t_max)	thickness (t_min)
0	1.6	1.84	1.7	3.5	3.2	0.35	0.25
1	2	2.34	2.2	4.5	4.2	0.35	0.25
2	2.5	2.84	2.7	5	4.7	0.55	0.45
3	3	3.38	3.2	6	5.7	0.55	0.45
4	3.5	3.88	3.7	7	6.64	0.55	0.45
5	4	4.48	4.3	8	7.64	0.55	0.45
6	5	5.48	5.3	9	8.64	1.1	0.9
7	6	6.62	6.4	11	10.57	1.8	1.4
8	8	8.62	8.4	15	14.57	1.8	1.4
9	10	10.77	10.5	18	17.57	1.8	1.4
10	12	13.27	13	20	19.48	2.7	2.3
11	14	15.27	15	24	23.48	2.7	2.3
12	16	17.27	17	28	27.48	2.7	2.3
13	20	21.33	21	34	33.38	3.3	2.7
14	24	25.33	25	39	38.38	4.3	3.7
15	30	31.33	31	50	49.38	4.3	3.7
16	36	37.62	37	60	58.8	5.6	4.4

Note: The measurements in the table above are shown with: length_unit_base="mm". These measurements will convert when the base units are changed. See Length Units for more information on setting the base units.

Variable Documentation

dtc_fastener_metric_washers_iso_7092

<map> ISO 7092 fastener data table columns map.

Definition at line 283 of file iso_7092.scad.

dtr_fastener_metric_washers_iso_7092

<table> ISO 7092 fastener data table rows.

Definition at line 296 of file iso_7092.scad.