ISO 7046-1p

[metric/screws] Phillips flat head machine screws; ISO 7046-1p; DIN 965. More...

Collaboration diagram for ISO 7046-1p:

Files
file	iso_7046_1p.scad
	[metric/screws] Phillips flat head machine screws; ISO 7046-1p; DIN 965.

Variables
	dtc_fastener_metric_screws_iso_7046_1p
	dtr_fastener_metric_screws_iso_7046_1p

Detailed Description

[metric/screws] Phillips flat head machine screws; ISO 7046-1p; DIN 965.

Requires:
include <omdl-base.scad>;
include <database/component/fastener/iso_7046_1p.scad>;

Phillips flat head machine screws table

idx	nominal size (ns)	thread pitch (tp)	head diameter (a_max)	head diameter (a_min)	head height (h_max)	recess diameter (m_ref)	recess penetration (g_max)	recess penetration (g_min)	thread runout (u_max)	phillips driver size (t)
0	M1.6	0.35	3	2.7	1	1.6	0.9	0.6	0.7	undef
1	M2	0.4	3.8	3.5	1.2	1.9	1.2	0.9	0.8	undef
2	M2.5	0.45	4.7	4.4	1.5	2.9	1.8	1.4	0.9	1
3	M3	0.5	5.5	5.2	1.65	3.2	2.1	1.7	1	1
4	M4	0.7	8.4	8.04	2.7	4.6	2.6	2.1	1.4	2
5	M5	0.8	9.3	8.94	2.7	5.2	3.2	2.7	1.6	2
6	M6	1	11.3	10.87	3.3	6.8	3.5	3	2	3
7	M8	1.25	15.8	15.37	4.65	8.9	4.6	4	2.5	4
8	M10	1.5	18.3	17.78	5	10	5.7	5.1	3	4

Note

The measurements in the table above are shown with: length_unit_base="mm". These measurements will convert when the base units are changed. See Length Units for more information on setting the base units.

References:
ISO 7046-1p
DIN 965
ISO 7046-1
fasteners.eu

Variable Documentation

dtc_fastener_metric_screws_iso_7046_1p

dtc_fastener_metric_screws_iso_7046_1p

<map> ISO 7046-1p fastener data table columns map.

Definition at line 275 of file iso_7046_1p.scad.

dtr_fastener_metric_screws_iso_7046_1p

dtr_fastener_metric_screws_iso_7046_1p

<table> ISO 7046-1p fastener data table rows.

Definition at line 291 of file iso_7046_1p.scad.