DIN 125A

[metric/washers] Flat washers; DIN 125A; ISO 7089. More...

Collaboration diagram for DIN 125A:

Files
file	din_125a.scad
	[metric/washers] Flat washers; DIN 125A; ISO 7089.

Variables
	dtc_fastener_metric_washers_din_125a
	dtr_fastener_metric_washers_din_125a

Detailed Description

[metric/washers] Flat washers; DIN 125A; ISO 7089.

Requires:
include <omdl-base.scad>;
include <database/component/fastener/din_125a.scad>;

parameters

Flat washers table

idx	nominal size (ns)	internal diameter (id_max)	internal diameter (id_min)	outside diameter (od_max)	outside diameter (od_min)	thickness (t_max)	thickness (t_min)
0	3	3.38	3.2	7	6.64	0.55	0.45
1	3.5	3.88	3.7	8	7.64	0.55	0.45
2	4	4.48	4.3	9	8.64	0.9	0.7
3	5	5.48	5.3	10	9.64	1.1	0.9
4	6	6.62	6.4	12	11.57	1.8	1.4
5	8	8.62	8.4	16	15.57	1.8	1.4
6	10	10.77	10.5	20	19.48	2.2	1.8
7	12	13.27	13	24	23.48	2.7	2.3
8	16	17.27	17	30	29.48	3.3	2.7
9	20	21.33	21	37	36.38	3.3	2.7

The A in 125A denotes that this washer is not chamfered.

Note

The measurements in the table above are shown with: length_unit_base="mm". These measurements will convert when the base units are changed. See Length Units for more information on setting the base units.

References:
DIN 125A
ISO 7089
fasteners.eu

Variable Documentation

dtc_fastener_metric_washers_din_125a

dtc_fastener_metric_washers_din_125a

<map> DIN 125A fastener data table columns map.

Definition at line 283 of file din_125a.scad.

dtr_fastener_metric_washers_din_125a

dtr_fastener_metric_washers_din_125a

<table> DIN 125A fastener data table rows.

Definition at line 296 of file din_125a.scad.