 |
omdl
v0.9.5
OpenSCAD Mechanical Design Library
|
|
omdl
v0.9.5
OpenSCAD Mechanical Design Library
|
[metric/screws] Flat head socket cap screws; ANSI B18.3.5M; ASME. More...
Collaboration diagram for ANSI B18.3.5M:Files | |
| file | ansi_b18_3_5m.scad |
| [metric/screws] Flat head socket cap screws; ANSI B18.3.5M; ASME. | |
Variables | |
| dtc_fastener_metric_screws_ansi_b18_3_5m | |
| dtr_fastener_metric_screws_ansi_b18_3_5m | |
[metric/screws] Flat head socket cap screws; ANSI B18.3.5M; ASME.
| Requires: |
|---|
| include <omdl-base.scad>; |
| include <database/component/fastener/ansi_b18_3_5m.scad>; |
Flat head socket cap screws table
| idx | nominal size (ns) | thread pitch (tp) | body diameter (b_max) | body diameter (b_min) | head diameter (a_max) | head diameter (a_min) | head height (h_ref) | head height (h_tol) | hex socket size (j_nom) | key engagement (t_min) | wall thickness (w_min) | drill allowance (d_max) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | M3 | 0.5 | 3 | 2.86 | 6.72 | 5.35 | 1.86 | 0.3 | 2 | 1.1 | 0.25 | 0.3 |
| 1 | M4 | 0.7 | 4 | 3.82 | 8.96 | 7.8 | 2.48 | 0.3 | 2.5 | 1.5 | 0.45 | 0.4 |
| 2 | M5 | 0.8 | 5 | 4.82 | 11.2 | 9.75 | 3.1 | 0.35 | 3 | 1.9 | 0.66 | 0.5 |
| 3 | M6 | 1 | 6 | 5.82 | 13.44 | 11.7 | 3.72 | 0.35 | 4 | 2.2 | 0.7 | 0.6 |
| 4 | M8 | 1.25 | 8 | 7.78 | 17.92 | 15.6 | 4.96 | 0.4 | 5 | 3 | 1.16 | 0.8 |
| 5 | M10 | 1.5 | 10 | 9.78 | 22.4 | 19.5 | 6.2 | 0.5 | 6 | 3.6 | 1.62 | 0.9 |
length_unit_base="mm". These measurements will convert when the base units are changed. See Length Units for more information on setting the base units.| References: |
|---|
| ANSI B18.3.5M |
| ASME |
| ANSI/ASME B18.3.5M-1986 |
| dtc_fastener_metric_screws_ansi_b18_3_5m |
<map> ANSI B18.3.5M fastener data table columns map.
Definition at line 273 of file ansi_b18_3_5m.scad.
| dtr_fastener_metric_screws_ansi_b18_3_5m |
<table> ANSI B18.3.5M fastener data table rows.
Definition at line 291 of file ansi_b18_3_5m.scad.